Sectional garage doors are the most common residential door. How they work, insulation and customization options, installation, maintenance and cost.
Contents
Sectional garage doors are the most common residential garage doors: overhead doors of four or five horizontal panels joined by hinges that roll up on curved tracks and sit flat under the ceiling when open. Installed prices run about $800 to $5,000 for a single door and $1,200 to $10,000 or more for a double.
Key Takeaways
Torsion springs above the opening usually counterbalance the door, so an opener can lift it with little effort.
Double-layer doors reach about R-6 to R-9, and triple-layer doors with polyurethane reach about R-18 or more.
Standard track needs about 12 inches of headroom, but low-headroom kits fit tighter garages.
Sectional doors work with chain, belt, screw drive and jackshaft openers.
Lubricate twice a year and test the balance yearly; spring, cable and bottom bracket work is for a technician.
What Are Sectional Garage Doors?
A sectional garage door is an overhead door made of several horizontal panels hinged together. Rollers on the edges of each panel ride in tracks that run up the sides of the opening and curve back along the ceiling. Springs counterbalance the weight so the door, or an opener, can lift it with little effort.
Part
What it does
Sections (panels)
The door itself, hinged so it can follow the curve of the track
Hinges
Join the sections and hold the rollers
Rollers
Carry the door along the tracks
Tracks
Guide the door from vertical to horizontal
Springs
Balance the door's weight
Cables and drums
Transfer spring force to the bottom of the door
Opener
Moves the balanced door and provides safety reversal
Each of these parts wears at a different rate. The panels can last decades, while rollers, springs and opener parts are service items. For a closer look at each component, see our guide to garage door parts, which also explains how they work together.
Why Are Sectional Garage Doors So Popular?
The key benefit of a sectional garage door is that it opens straight up and back without swinging out or taking wall space. As a result, it is the most practical choice for the typical attached garage.
They do not swing out, so you can park close to the door.
Every material is available: steel, aluminum, wood, composite, glass.
Insulated options handle heat and noise well.
Parts are standard and easy to service.
Sectional doors also work with every common opener type, including chain, belt, screw drive and wall-mounted jackshaft models. In addition, many modern doors include pinch-resistant panel joints, and the opener adds photo-eye sensors and auto-reverse. Compared with an old one-piece tilt-up garage door, a sectional door frees the driveway in front of the garage and seals more evenly against the floor and jambs.
Insulation Options for Sectional Garage Doors
Sectional doors are offered in three main constructions, from a single uninsulated skin to a triple-layer insulated sandwich. The more layers and the denser the foam, the higher the R-value and the quieter the door.
Construction
Insulation
Typical R-value
Single layer
None
0
Double layer
Polystyrene board
About R-6 to R-9
Triple layer
Polystyrene or polyurethane between steel skins
About R-9 to R-18+
Polyurethane foam also bonds to the skins, adding stiffness and quieter operation as well as insulation.
Insulation matters most for attached garages, rooms built over the garage, and homes in hot inland areas such as the Central Valley and Inland Empire, where summer sun can heat an uninsulated door enough to warm the house. Along the cooler coast, however, a double-layer door is often enough. Good perimeter seals matter as much as the panel itself, so check the garage door seal at the bottom and sides too.
What Styles Do Sectional Garage Doors Come In?
Sectional garage doors offer the widest range of designs of any door type, because the same track and spring system works with nearly every material and panel style.
Panel styles: raised, recessed, flush, long or short panel, carriage house.
Materials: steel, aluminum, wood, composite, fiberglass and glass.
Windows in the top section or full-view glass.
Factory colors and wood-grain finishes.
Decorative handles and hinges.
Match the door to the architecture of the house. Raised panels and carriage house designs suit Spanish, Craftsman and traditional homes, while flush steel and full-view aluminum and glass suit modern designs. Many HOAs in California set rules for color, window style and material, so check your HOA guidelines before ordering. Most manufacturers also offer online design tools to preview options on a photo of your home.
Installation Considerations for Sectional Garage Doors
A successful sectional installation starts with accurate measurements of the opening and the space around it. The installer needs to confirm there is room for the tracks, springs and opener before the door is ordered.
Installers check headroom, side room and backroom, the condition of the jambs and header, and the right spring size for the new door's weight. If the garage is tight, low-headroom track kits are available.
Headroom: space between the top of the opening and the ceiling, typically about 12 inches or more for standard track.
Side room: a few inches on each side for vertical track, more for some spring systems.
Backroom: depth for the horizontal track and opener, roughly the door height plus a few feet.
Framing: solid jambs and header to anchor the track and springs.
Springs must be sized to the new door's weight, so old springs are rarely reused. In California, a new door can't be connected to an old opener without a battery backup; see the battery backup law. For a full breakdown of the job, see our guide to garage door replacement and installation.
Most sectional doors are balanced by torsion springs mounted on a shaft above the opening. The springs carry most of the door's weight, so they must be sized to that weight, which is why installers weigh the new door rather than guess. For example, a heavier insulated door with windows needs stronger torsion springs than a single-layer door of the same size. Because they store so much force, winding and setting the springs is a job for a trained technician.
How Do You Maintain a Sectional Garage Door?
Sectional doors need only light, regular care: lubrication, a few safety tests and an annual look at the hardware. These simple checks help the door run quietly and catch worn parts early.
Lubricate hinges, rollers and springs twice a year.
Test the balance yearly: disconnect the opener and lift the door halfway; it should stay put.
Also test the safety reversal monthly.
Wash the panels with mild soap and water twice a year, and rinse more often near the coast.
Check the bottom seal and side weatherstripping each season.
Look for frayed cables, cracked rollers and loose hinge bolts.
Book a professional tune-up yearly if the door is used many times a day.
How Much Do Sectional Garage Doors Cost?
Sectional garage doors typically cost about $800 to $5,000 for a single door and $1,200 to $10,000 or more for a double, depending on material, insulation and style. The table below shows the typical sectional garage door cost, installed.
Typical installed price ranges
Door
Single
Double
Non-insulated steel
$800 to $1,500
$1,200 to $2,500
Insulated steel
$1,200 to $2,500
$2,000 to $4,000
Wood or premium composite
$2,500 to $5,000
$4,000 to $10,000+
Windows, decorative hardware, custom colors, a new opener and removal of the old door also raise the sectional garage door cost. In addition, quotes vary by region and by how much framing work the opening needs. Ask for a written quote that itemizes the sectional garage door cost before any work begins, and see garage door replacement cost for more detail.
Frequently Asked Questions About Sectional Garage Doors
How long do sectional doors last?
The door itself often lasts 20 years or more, because the panels are the longest-lasting part. Springs, rollers and openers, however, are service items that need replacing sooner. Lubricating twice a year, testing the balance yearly and booking a professional tune-up when the door is used many times a day help every part last longer.
Can I replace a single damaged section?
Often yes, if the same model is still made, since sections are hinged together and can be swapped individually. If the model is discontinued, however, the whole door may need replacing. A technician should handle the swap, because the springs, cables and bottom brackets that hold the door are under high tension.
Are sectional garage doors better than roll-up doors?
For most homes, yes. Sectional garage doors offer more styles, better insulation and quieter operation. Roll-up doors make more sense when ceiling space is needed for storage or a car lift, or when headroom is very limited. A detached workshop is another good fit for a roll-up door.
What R-value should I choose for a sectional garage door?
In mild coastal areas, a double-layer door around R-6 to R-9 is usually enough. For attached garages in hot inland areas or rooms above the garage, a triple-layer door with a higher R-value is worth considering. Polyurethane cores generally deliver a higher R-value for the same thickness than polystyrene.
How much headroom does a sectional garage door need?
Standard track usually needs about 12 inches or more of clear space above the opening. If your garage has less, low-headroom track kits can fit sectional doors into tighter spaces. An installer should measure headroom, side room and backroom before ordering so the door and tracks fit correctly.
Can I install a sectional garage door myself?
It is not a safe DIY job. The springs must be sized to the new door's weight, which is why installers weigh the door rather than guess, and winding torsion springs takes training. Springs, cables and bottom brackets are under high tension. Hire a professional technician and ask for a written quote before work begins.