
Contents
Garage door track repair and replacement cost typically runs about $150 to $400 for a single track section and $300 to $700 for both tracks, installed. Simple realignment costs $150 to $300, while a high lift conversion runs $800 to $2,000. Because bent tracks can derail the door, a professional should do the work.
Below you will find what drives those prices and how to decide between repair and replacement.
Key Takeaways
Parts are a small share of the price; most of the cost is labor to secure the door, manage spring tension and rebalance it.
Track repair, such as realignment or straightening a minor dent for $100 to $200, costs less whenever the track itself is still sound.
Replace a track that is kinked, cracked, rusted through or has bent again after straightening.
Trying to replace garage door tracks yourself means working on a door under spring tension, so leave it to a professional.
Ask for a written quote that splits parts and labor and lists any rollers or hinges replaced at the same time.
What Do Garage Door Tracks Do?
Garage door tracks are the steel rails on each side of the door that guide the rollers from the closed position to the open position under the ceiling. They keep the door square in the opening and stop it from twisting or falling out of line.
Vertical and horizontal tracks guide the rollers and hold the door in line. Even a small bend can bind the door or let a roller escape.
Because the tracks control the path of the whole door, a problem in one spot affects the rollers, hinges, cables and opener. Catching damage early usually means a cheaper repair. For a full overview of track types and hardware, see our garage door tracks guide.
When Does a Garage Door Track Need Replacement?
A garage door track needs replacement when it can no longer hold its shape or keep the rollers in line. Watch for these signs:
Kinked or bent sections.
Rust through the track.
Rollers jumping out.
Tracks that will not stay aligned after adjustment.
Some problems look like track damage but are not. A door that sits crooked may have a cable or spring issue, and noise can come from worn rollers. Our guide to unbalanced garage door tracks explains how to tell the difference before you pay for new tracks.
How Much Does Garage Door Track Replacement Cost?
Replacing both tracks typically costs $300 to $700, and one section $150 to $400. The final garage door track replacement cost depends on how much of the track is affected and whether the door needs other work. These ranges include parts and labor for a standard residential door:
| Job | Typical cost |
|---|---|
| Track realignment | $150 to $300 |
| Straighten minor dent | $100 to $200 |
| Replace one track section | $150 to $400 |
| Replace both tracks | $300 to $700 |
| High lift conversion | $800 to $2,000 |
Parts are a small share of the total. Most of the price is labor, because the door has to be secured, the spring tension managed and the door rebalanced after the new track is installed. Prices in high-cost areas such as the Bay Area and Los Angeles can sit toward the upper end of each range. Always ask for a written, upfront quote before work begins.
When you read a quote, look at how it splits parts and labor. The track sections themselves are relatively inexpensive. Most of the price is labor, because the technician has to support the door, manage spring tension safely, install and plumb the new tracks, then rebalance the door and test it. That labor is the same whether the track costs a little more or less.
Is Track Repair Cheaper Than Replacement?
Track repair costs less than replacement whenever the track itself is still sound. The table below shows how technicians usually handle each condition.
Track repair is far cheaper when the damage is limited to loose hardware or a small dent.
| Condition | Usually |
|---|---|
| Loose brackets | Adjust and tighten |
| Minor dent | Straighten |
| Bent or kinked section | Replace that section |
| Rusted or worn throughout | Replace both tracks |
| Converting to high lift | New track system |
As a rule, if a track has been straightened before and bent again, or if rust has weakened the steel, replacement is the better value. Repeated repairs on a weak track tend to cost more over time, and a track that fails while the door is moving can damage panels, rollers and the opener.
Track repair is usually enough when the track is out of alignment, the brackets have worked loose or there is a small bend that can be straightened. Replacement is the better value when the track is kinked, cracked or rusted through, or when a vehicle has bent it badly. A repaired track that still pinches the rollers will keep wearing them and the opener.
Can You Replace Garage Door Tracks Yourself?
Usually not: garage door track replacement should be done by a professional. Homeowners can safely clean tracks and tighten loose bracket bolts with the door closed, but removing and installing a track is a different job.
Track replacement means removing the door from the tracks while it is under spring tension. A professional is strongly recommended.
DIY-friendly: cleaning tracks, tightening jamb bracket and hanger bolts, replacing upper rollers one at a time.
Professional only: removing a track, replacing bottom brackets or cables, rehanging a derailed door, converting to high lift.
The risk is not the track itself but the torsion springs and cables connected to the door. Releasing them incorrectly can cause serious injury. A professional job also includes rebalancing, which protects the opener and the new tracks.
Trying to replace garage door tracks yourself is risky. The door is heavy, the bottom brackets and cables are under spring tension and a track that is not set plumb can let the door drop. Experienced DIYers can replace garage door tracks on a door whose spring tension has been properly released, but most homeowners are safer hiring a professional for the whole job.
The Professional Garage Door Track Replacement Process
The professional garage door track replacement process follows a set order so the door stays safe and balanced throughout. Most single-door jobs take a few hours.
Secure the door and release or block spring tension.
Remove the damaged track and brackets.
Install the new track, plumb and parallel.
Reinstall rollers and check the radius.
Rebalance the door and test operation.
A good technician also checks the rollers, hinges, cables and springs while the door is apart, then tests the opener's safety reversal. If your door has come off its track and will not close, emergency garage door repair is available from some independent providers, often the same day; ask about after-hours fees.
Additional Factors That May Affect Your Track Replacement Cost
Several factors can raise or lower your final garage door track replacement cost. The main ones are listed below.
Door size and track length.
Track gauge and radius.
Whether rollers and hinges are replaced at the same time.
Labor to remove and rehang the door if it derailed.
A few California factors can also affect the price. Coastal homes may need fully galvanized tracks and hardware to resist salt air. After an earthquake, the framing that holds the tracks may need repair before new tracks can be mounted. Emergency or after-hours calls usually cost more than a scheduled visit, and adding new garage door roller replacement at the same time adds parts but saves a separate trip.
Frequently Asked Questions About Garage Door Track Replacement Costs
Can just one of the tracks be replaced?
Yes, if a matching track is available and the other track is in good condition. A single section typically costs $150 to $400 installed. However, ask whether the matching section on the other side is worn too, since replacing both together can save a second service call.
How long do garage door tracks last?
Often the life of the door, 20 years or more, unless they are damaged. Rust and vehicle impacts are common reasons tracks fail early, so coastal homes may need fully galvanized tracks and hardware to resist salt air. Have a track that will not stay aligned after adjustment checked by a professional.
Does homeowners insurance cover garage door track replacement?
It depends on your policy and the cause of the damage. Sudden events, such as a vehicle hitting the door, may be covered, while wear and tear usually is not. Check your policy terms or ask your insurer. Keep the technician's written quote and photos of the damage in case you file a claim.
How long does garage door track replacement take?
Most single-door track replacement jobs take a few hours. The technician secures the door and releases or blocks spring tension, removes the damaged track and brackets, then installs the new track plumb and parallel. Finally, the rollers go back in, the door is rebalanced and the opener's safety reversal is tested.
Why do garage door tracks bend?
Garage door tracks usually bend from a vehicle impact, or after an earthquake knocks the framing out of line. Loose brackets also let a track shift out of alignment. Even a small bend can bind the door or let a roller escape, so have it checked promptly, because a track that fails while the door is moving can damage panels, rollers and the opener.
Sources & References
- DASMA – Technical Data Sheet #174: Building Occupant – Checking a Garage Door for Damage. What a homeowner can check after an impact (checked November 2026)
- DASMA – Technical Data Sheet #183: Garage Door Component Substitution. Choosing replacement parts that keep a door working as designed (checked November 2026)
- DASMA – Technical Data Sheet #167: Residential Sectional Garage Door and Electric Operator Checklist for Home Inspectors and Consumers. Inspection checklist for sectional doors, springs, cables, hardware and openers (checked November 2026)
- Inch Calculator – Cost to Repair a Garage Door. National repair prices by problem (springs, cables, tracks, sensors) (checked November 2026)






